If your company's IT policies prevent SLP network broadcasting, you can use other methods for detecting the
device in Lyve Client. See Alternative methods for device detection below.
Setup overview
Setting up the connection between Lyve Mobile Rackmount Receiver’s ports and the host computer
requires three steps:
1. Set up the IP addresses for Lyve Mobile Rackmount Receiver’s iSCSI ports.
2. Set up the iSCSI initiator/target(s).
3. Map the iSCSI initiator to iSCSI target(s).
Pre-setup
Before beginning the configuration, make sure the Lyve Client app is installed on a computer connected to
the management network. See the
Lyve Client Software User Manual
for installation details.
1. Insert Lyve Mobile Array into slot A or B on Lyve Mobile Rackmount Receiver. Be sure to select the
correct slot for the iSCSI connections behind Rackmount Receiver.
2. On the host computer, open the Lyve Client app.
The LED on the device inserted in Lyve Mobile Rackmount Receiver blinks white during the boot process
and turns solid orange. The solid orange LED color indicates the device is ready to be unlocked.
The host computer will automatically unlock the device if it was connected to Lyve Mobile Array in the past
and is still authorized for security. If the host computer has never unlocked the device, you will need to
enter your Lyve Management Portal username and password in the Lyve Client app. See Setup
Requirements in the Lyve Mobile Rackmount Receiver User Manual.
57
Lyve Mobile Rackmount Receiver
7/26/22
Summary of Contents for Lyve Mobile Array
