N E M E S I S
Instruction Manual.
18
3
.
4
.
5
.
Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drill-
ing each hole.
With the muffler, needle valve, and spark/
glow plug removed from the engine, slide
the cowl in place over the engine. Tem-
porarily install the propeller and spinner
in order to fid the exact location of the
cowl. When satisfied with the cowl place-
ment, secure the cowl to the fuselage us-
ing masking tape.
Install the muffler and muffler extension
onto the engine and make the cutout in
the cowl for muffler clearance. Connect
the fuel and pressure lines to the carbu-
retor, muffler and fuel filer valve. Secure
the cowl to fuselage using the M3x10mm
socket head screws. Putting a small length
of silicon fuel tube under the head of the
screw helps with vibration.
6
.
7
.
M3x10mm
8
.
