17
Blow through one of the lines to en-
sure the fuel lines have not become kinked
inside the fuel tank compartment. Air should
flow through easily.
Connect the lines from the tank to the en-
gine and muffler. The vent line will connect
to the muffler and the line from the clunk to
the carburetor.
Servo arm.
Adjustable servo
connector.
Loctite secure.
COWLING.
1) Tape the cowl to the fuselage using
low-tack tape.
2) Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drill-
ing each hole.
Summary of Contents for RANS S-20 RAVEN-20cc
