Important Safeguards
4
SAFETY INSTRUCTIONS
WARNING: Whenever using any equipment,
always follow manufacturers’
instructions to ensure safe operation.
CAUTION: Read and make sure you understand
these safety and operating guidelines.
1.
Do not operate the machine until it is connected to
a compatible power source.
2.
Familiarize yourself with the layout of the control
panels and with the operation of the lacquer system.
3.
Operators should be trained on the proper use of
the machine and all safety procedures.
4.
Comply with all safety warning signs, labels and
instructions.
5.
Ensure that eye protection and clean towels are
available for use during cleanup.
6.
It is advisable to wear eye protection when
filling/emptying the lacquer container. Ensure that
an approved emergency eyewash station is adjacent
to the laminator.
CAUTION: Prior to handling any chemical
products, read the manufacturers’
product label and the Material Safety
Data Sheets (MSDS) for important
health, safety and environmental
information. Always observe
manufacturers recommendations
when handling chemicals.
To obtain MSDS Sheets for any Seal Graphics products,
contact Seal Graphics Technical Services at (410) 379-
5688 or (800) 490-4232.
PREVENTIVE MEASURES
Do not feed objects such as staples, paper clips and
rough or abrasive materials through the laminating
rollers.
Keep all objects, such as tools, rulers, pens, markers and
knives away from the roller opening. To prevent such
items from accidentally being fed into the rollers, do not
leave them on the laminator.
SAFETY SYMBOLS USED ON THE LAMINATOR
ROTATING PARTS: RISK OF INJURY
WARNING: Failure to use caution near rotating
rollers could result in physical injury.
Be careful that items such as loose
clothing, long hair and jewelry do not
become entangled in rotating parts.
ELECTRICAL PARTS:
DANGER OF BEING INJURED
BY ELECTRICITY
DANGER! ATTEMPT TO ACCESS THIS AREA
COULD RESULT IN PHYSICAL
INJURY BY HIGH VOLTAGE.
ONLY AUTHORIZED MAINTENANCE
OR SERVICE TECHNICIANS SHOULD
ATTEMPT REPAIR OF THIS AREA.
