7
E
n
g
lis
h
3.5 Unpacking the laminator
1.
Cut the bands holding the box to the pallet.
2.
With two people, carefully lift the box straight up over the machine (See figure 2).
3.
Remove any loose packing material.
4.
Remove the ramp and packing around ramp.
5.
Position ramp as shown in figure 3.
6.
Remove 4 hold down bolts.
7.
Remove 2 stabilizing blocks.
8.
With 2 people, carefully push machine down ramp.
9.
Remove remaining packing material and unpack the Take-up Tube.
10.
Inspect the machine for any physical damage.
Figure 2
Figure 3
Ramp
Hold
Down
Bolts
Stabilizing
Blocks
Hold
Down
Bolts
Summary of Contents for 54 EL
Page 2: ...Copyright 2010 Neschen Americas All rights reserved ...
Page 143: ......
Page 144: ......
