IS287 ECN3321
Page 4
SAFETY INSTRUCTIONS
WARNING!
Basic safety precautions, including the following, should be
followed to reduce the risk of personal injury. Make sure you
have read all of these instructions before switching on the unit.
Keep this User Guide in a safe place for future reference for you and your
staff.
Do not clean the unit with a water jet.
REMOVAL OF PACKAGING
In the interest of hygiene, you should clean the product after unpacking and
ensure all plastic coatings are removed before use.
This unit is heavy. Take care when moving it. Do not pull the unit across your
work surface as it is heavy and may make a mark.
The unit relies on the circulation of warm air, which must pass through and
around the shelves. Ensure circulation is not obstructed by food product
or aluminium foil.
GENERAL
Do not try to modify this product.
Ensure that the electrical supply cable is not damaged.
If the supply cable is damaged, it should be replaced by Lincat Ltd or suitably
qualified persons, in order to avoid a hazard.
EQUIPOTENTIALITY
This equipment is provided with an equipotential bonding terminal to
allow earth cross-bonding with other equipment.
