28
© Sealevel Systems, Inc. SeaConnect 370 Manual | SL9269 11/2022
Profiles
Figure 16: Profiles page
This page lists all defined profiles and allows you to select one or more profiles to remove. If no
profiles are defined (or all profiles are removed), the device will automatically boot in AP mode.
Otherwise, the device will boot into Infrastructure Mode unless overridden by the user. (See
section Entering Access Point Mode Manually)
Add Profile Button (Green +)
This button opens a modal dialog which allows you to add a Wi-Fi profile for use in Infrastructure
Mode. Enter the SSID, security type, security key (if applicable), and profile priority of the profile you
which to add. Click Save to add it to the list (Figure 17).
Figure 17: Add Profile dialog
After adding or removing a profile, you must power cycle the SeaConnect 370 for your changes to
take effect.
