© Sealevel Systems, Inc.
- 33 -
SeaLINK User Manual
Onboard Web Server Configuration
Once the SeaLINK device has been assigned an IP address, you can configure it
through the onboard web server. Start the SeaLINK setup and configuration tool,
select your device, and click ‘Advanced…’. Alternately, you may open a web
browser (Internet Explorer, Firefox, Netscape, etc.) and type ‘http://xxx.xxx.xxx.xxx’
into the URL field, where ‘xxx.xxx.xxx.xxx’ is the IP address of the SeaLINK
device.
The configuration utility ‘SeaLINK Config’ (Start
Æ
Programs
Æ
SeaLINK
Æ
SeaLINK Config) can be used to determine the IP address. The web interface
provides three separate pages selectable by tabs on the left side of the screen. A
Summary page lists various details about the device, a Port Settings page allows you
to configure aspects of each serial port, and an Administration page lets you change
the network and security settings. Some options or settings may not be available
depending on the model SeaLINK device you are using.
Summary Page
The Summary page lists the name of the SeaLINK device and part number. A user
defined device name is shown in parenthesis and can be set on the Administration
page. A brief description of the SeaLINK device capabilities is shown and the
Product Specifications and Settings section follows.
