6
© Sealevel Systems, Inc.
2101 Manual | SL9089 8/2021
Hardware Installation
The
232
can be connected to any Upstream Type “A”
port either at the PC host or an Upstream
Hub, and
since it is hot pluggable, there is no need to power down your computer prior to installation. The
232
requires no user hardware configuration. Once you have installed the software simply plug
the
232
into an available USB port. The drivers that were installed during setup will automatically
be used to configure the adapter. You should see one or more “New Hardware Found”, indicating the actual
port being created. If you view your systems’ Device Manager at this point, you should have a new “COM”
port in the Ports (COM & LPT) Device Class. You can access your new COM: port by using the assigned
COM: identifier. This assignment will vary from system to system. At this point, the hardware is recognized.
To verify operation, use Sealevel Systems supplied WinSSD diagnostic utility. WinSSD can be found in the
Start, Programs group.
