pressure left in the hose. Disconnect the air brush from the
compressor.
4.10
During and immediately after operation, the finned pump head
may be hot and should not be touched. If the unit must be
moved, lift it by the handle only. Allow the unit to cool before
storing it.
4.11
Should there appear to be any loss of efficiency when
spraying, ensure first that the air brush is scrupulously clean
and functioning properly. If the air brush is satisfactory then
refer to the trouble shooting guide for the compressor.
FAULT
CAUSE
REMEDY
low air flow.
Air valve plate or air valve is
Change the defective air valve plate
damaged.
or air valve.
Diaphragm damaged.
Change diaphragm.
The head screws are too loose.
Tighten the screws equally.
Air hose leaking.
Check seals or renew hose.
Noisy operation.
The head screws are too tight.
loosen the screws and then tighten
them equally. Do not overtighten.
Bearing fault.
Return to dealer for checking.
Humming noise but does
The head screws are too tight.
loosen the screws and then tighten
not work.
them equally. Do not overtighten.
Armature fault.
Return to dealer for checking.
5.1
Keep the unit clean at all times.
Do not cover any of the ventilation slots.
Do not allow any extraneous material to enter the unit via any
of the ventilation openings.
Store in dust free and dry conditions.
5.2
The troubleshooting guide below is intended to give you an
indication of what type of fault may have developed with your
unit over a long period of service. The chart is not intended as
a guide on how to repair the fault yourself. In all cases we
recommend that the unit be returned to an authorised service
agent for rectification.
5. MAINTENANCE & TROUBLESHOOTING
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
AB900.V3 Issue: 1 - 05/04/11
