7. TROubLESHOOTING
Problem
Possible Cause
Remedy
no lcD display
Bad battery connection
check /clean Battery terminals
Batteries expired
Replace batteries
Incorrect measurements
Wrong K Factor
Refer to section 5 calibration
Flow rate below meter limits
Increase flow rate
Reduced or zero flow rate
turbine blocked
contact your sealey dealer
Meter not recording flow
Faulty PCB
contact your sealey dealer
Faulty turbine
contact your sealey dealer
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for
any claim.
INFORMATION:
Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
Under the Waste Batteries and Accumulators Regulations 2009, Jack sealey ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705. See section 7.1 for battery removal details
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. contact your local solid waste
authority for recycling information.
