IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
Refer to instruction
manual
API2103 Issue: 1 - 19/10/17
Original Language Version
© Jack Sealey Limited
INSTRUCTIONS FOR:
INDUSTRIAL 3-LEVEL WORKSHOP
TROLLEY
MODEL NO:
API2103
1. SAFETY
1.1.
GENERAL SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this trolley.
9
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
8
DO NOT
overload the trolley - see Specifications - section 3.
9
Use the trolley in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the trolley clean and tidy in accordance with good workshop practice.
8
DO NOT
use the trolley
for any purpose other than that for which it is designed.
8
DO NOT
stand on the trolley, use it as a ladder or allow others to ride on the trolley.
9
Use the wheel locks to prevent the trolley from inadvertently moving.
8
DO NOT
leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
8
DO NOT
use trolley on uneven ground and do not run over curbs or steps - use a ramp.
8
DO NOT
use trolley if any part is significantly damaged, paying particular attention to the wheels.
9
Keep children and unauthorised persons away from the work area.
2. INTRODUCTION
Industrial quality workshop trolley, ideal for use in any garage or workshop environment. Two deep walled shelves give tool and component
security. Adjustable legs on trolley allow the user to set at their desired height. Worktop is installed by placing the top shelf base up, creating a
sturdy work surface. Optionally, install the top shelf base down to allow extra storage. Features four swivel castors, two of which have toe locks.
3. SPECIFICATION
Model No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
API2103
Overall Size (W x D x H): . . . . . . . . . . . . . . 750 x 445 x 940mm
Shelf Size (W x D x H): . . . . . . . . . . . . . . . . . 640 x 405 x 45mm
Worktop Size (W x D x H): . . . . . . . . . . . . . . 750 x 445 x 30mm
Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300kg(100kg/level)
