instructions for
modular 4/5/7 draw cabinet 680mm
model no:
aPmS51, aPmS59, aPmS62
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Safety
warninG!
ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this
cabinet.
locate cabinet in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
warninG!
use cabinet on level and solid ground, preferably concrete.
Keep the cabinet clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the work area.
do not
use the cabinet for any purpose other than that for which it is designed.
do not
use the cabinet outdoors.
do not
place the cabinet in a damp or wet location or an area where there is condensation.
do not
clean the cabinet with any solvents which may damage the surfaces or the protective coating.
do not
move the cabinet when there are items placed inside.
do not
step on the shelves.
do not
overload the cabinet.
2. introduction
m
odular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase a
simple base cabinet or create a full workshop storage system.
3. SPecification
model no: .................................................................
APMS51
size (W x d x H):.....................................
680 x 460 x 910mm
s
mall drawer (x1):
.....................................
565 x 400 x 60mm
m
edium drawer (x1):
...............................
565 x 400 x 135mm
large drawer (x2): ...................................
565 x 400 x 225mm
model no: ............................................
APMS59 (Not Shown)
size (W x d x H):.....................................
680 x 460 x 910mm
s
mall drawer (x1):
.....................................
565 x 400 x 60mm
medium drawer (x4): ...............................
565 x 400 x 135mm
model no: ............................................
APMS62 (Not Shown)
size (W x d x H):....................................
680 x 460 x 910 mm
m
edium Drawer (x5):
...............................
565 x 400 x 70 mm
large drawer (x2): .................................
565 x 400 x 150 mm
A
PMS51, APMS59 , APMS62 Issue 2 (H,3,F) 17/11/17
Original Language Version
© Jack sealey limited
refer to
instruction
manual
Wear
protective
gloves
