background image

8. TROUBLESHOOTING

Sole UK Distributor

Sealey Group 

Bury St. Edmunds, Suffolk .

Declaration of Conformity

We, the sole importers into the UK, declare that the product listed below is in conformity with the following EEC standards and directives.

The construction file for this product is held by the Manufacturer

and may be inspected on request by a national authority upon request

to Jack Sealey Ltd.

For Jack Sealey Ltd.  Sole importer into the UK of Sealey Power Products

3rd October 2003

Unit does not start.

No current. The power cable, switch, 

Check the plug and fuse. Repair or 

or motor faulty. Tank may be full of water.

replace faulty part. Empty tank if full.

Dust comes from the motor unit.

Damaged filter, or filter incorrectly fitted.

Reposition or replace the filter. 

Take care, as warranty may be lost.

Low efficiency.

Container is full. Filter obstructed.

Empty container. Clean or replace the 

Hose or accessory blocked.

filter (Chapter 7). Unblock hose or accessory.

Filter problems.

Outlet filter obstructed. Hose or tool blocked.

Check, clean, or replace the filter (chapter 7).

Remove any obstruction from hose.

Motor speed increases

Container is full. Filter obstructed.

Empty the container, clean, refit, or replace 

or motor vibrates.

Hose or accessory blocked.

filter (Chapter 7). Unblock hose or accessory.

Foam comes out of the air filter.

Wrong detergent used, or used on carpet 

Add Sealey VMR922 Anti-foaming 

or fabric previously cleaned with foaming 

agent to waste water tank (see 5.1).

detergent.

Detergent solution spray not 

Detergent filter clogged.

Remove filter and clean (see 7.2.1) . 

uniform.

Pick up pipe clogged.

Remove pick up pipe and clean filter (7.1.2).

Auto Valet Model: VMA913

73.23/EEC Low Voltage Directive 

89/336/EEC EMC Directive 

93/68/EEC CE Marking Directive

CONSUMABLES

Part No VMR921 Detergent for Valet Machine  . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.
Part No VMR925 Detergent for Valet Machine  . . . . . . . . . . . . . Packs of 4 x 5 Ltr Containers.
Part No VMR922 Defoaming Agent  . . . . . . . . . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.

7.2.3. AIR OUTLET FILTER.

Behind the side grille in the motor head a special filter is located (fig 28) which ensures the air returned to the environment is as free 

as possible from impurities. The filter will require periodic changing, to do so use a coin (or similar) to gently lever off the grille,

remove the filter and replace with a new one. When refitting the grille ensure the arrow on the inner part of the grille points upwards.

We recommended you keep a spare of each filter type.

Remove grille and

replace filters

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this equipment.

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: 

Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.

fig 28

Signed by Mark Sweetman

VMA9133 - 3 - 031003

01284 757500

sales@sealey.co.uk

www.sealey.co.uk

01284 703534

e-mail

Web

Summary of Contents for AUTO Valet VMA 913






Reviews: