background image

230V HHO ENGINE CARBON CLEANER

MODEL NO: 

CC230V

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

1.1.    

ELECTRICAL  SAFETY

 

‰

  

WARNING! 

It is the user’s responsibility to check the following:

 

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all  

 

electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical  

 

products. You may obtain an RCD by contacting your local Sealey stockist. 

 

If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable  

 

 

Appliance Test) tested.

 

ELECTRICAL SAFETY INFORMATION: 

 it is important that the following information is read and understood.

1.1.1.   

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 

1.1.2.   

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

1.1.3. 

  

IMPORTANT

: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the  

 

correct fuse - see fuse rating in these instructions.

 

8

   DO  NOT

 pull or carry the appliance by the power cable.

 

8

  

DO NOT

 pull the plug from the socket by the cable. 

 

8

   DO  NOT

 use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or 

             replaced immediately by a qualified electrician.

1.1.4. 

  

This product is fitted with a BS1363/A 13 Amp 3 pin plug. 

      

If the cable or plug is damaged during use, switch the electricity supply and remove from use. 

      

Ensure that repairs are carried out by a qualified electrician.

         

Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician.

 

A) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.

 

B) Connect the BROWN live wire to the live terminal ‘L’.

 

C) Connect the BLUE neutral wire to the neutral terminal ‘N

’.

      

Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. 

        

Sealey recommend that repairs are carried out by a qualified electrician.

1.2.    

GENERAL  SAFETY

 

‰

  

WARNING!

 Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this    

  unit. Wear appropriate PPE.

 

9

   Familiarise yourself with the applications, limitations and potential hazards of the unit.

 

‰

   WARNING: 

Only use in well ventilated areas. Exhaust gases are poisonous.

 

9

   Operators must receive adequate training before using the unit.

 

9

   Always perform automotive work in a safe environment. 

 

8

  

DO NOT

 operate the unit while under the influence of drugs, alcohol or intoxicating medication, or if tired.

 

8

  

DO NOT

 cover the unit or place heavy loads on top of it.

 

8

  

DO NOT

 operate in wet or damp conditions.

 

9

   Check the condition and operation of all components before each use.

 

9

   Operate the unit on a smooth level surface in order to avoid tipping or spillage.

 

9

   Stand correctly keeping a good footing and balance, ensure that the floor is not slippery and wear non-slip shoes.

 

9

   Keep unauthorised persons away from the work area. Any persons working within the area must wear the same protective items.

 

9

   Keep the unit and cables in good working order and condition. Take immediate action to repair or replace damaged parts.

Replacement fuse 

rating: 13A

C

C230V     Issue 1     15/05/2020

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

Electrical shock 

hazard

 Hot surfaces

Do not cover

 

Wear eye 

protection

 

Wear protective 

gloves

 

Wear ear 

protection

 

Wear safety 

footwear

 

Wear protective 

clothing

 Warning 

Corrosive 

substance

 

Use in well 

ventilated areas

 Keep in dry area 

protect from rain

 

Wear a mask

 

Warning

Warning:

No open flames

Reviews: