3.
i
SPECIFICATION
Model No: ...........................................................CP20VAGX
Free Speed: ........................................................ 10,000RPM
Disk size .................................................................Ø 115mm
Spindle size: ................................................................... M14
Motor power ....................................................................48W
Net weight: .................................................................... 3.7kg
Noise Power..............................................................97dB(A)
Noise Pressure .........................................................86dB(A)
Vibration ................................................................. 5.598m/s
2
Uncertainty ................................................................. 1.5m/s
2
Nett weight: ................................................................... 3.7kg
Consumables:
Battery: .............................20V 2Ah-4Ah Li-ion (not included)
2Ah Battery .......................................................... CP20VBP2
3Ah Battery ............................................................ CP20VBP
4Ah Battery .......................................................... CP20VBP4
Mains charger ....................................................... CP20VMC
4. OPERATION
WARNING:
Remove battery before fitting / removing wheels or maintenance is carried out.
4.1.
Ensure that you have read, understood and comply with all the safety instructions in Section 1.
4.2.
TO REMOVE BATTERY
4.2.1.
To remove the battery from the equipment, depress the spring loaded buttons on the battery pack. Remove the battery pack by sliding
out.
DO NOT
touch the metal battery terminals.
4.3.
FITTING A DISK
4.3.1.
Lock gearbox in order to undo or tighten flange and clamp nut (fig.2). Depress button on the top surface of the tool head (fig.1).
4.3.2.
FLAT CUTTING DISK fig.3
4.3.3.
DEPRESSED CENTRE CUTTING DISK fi
g.4
Original Language Version
© Jack Sealey Limited
CP20VAGX Issue1 07/06/19
fig.1
fig.2
fig.4
fig.3
