Original Language Version
© Jack Sealey Limited
4. oPeratioN
This comprehensive time saving tool is designed to remove and install the slotted bushes found in the suspension springs on a
range of Renault, mAN and Volvo vehicles without the need to remove the suspension spring. (See application table) The slotted bush
needs compressing during installation due to its working tension.
The hydraulic ram supplied is to be used with a hydraulic pump (not supplied) such as the Sealey RE97-10-01.
4.1.
removal
4.1.1.
Assemble the components as per the applications table for the vehicle being repaired and connect the ram to the RE97-10-01. (fig.1)
Operate the pump to extract the bush, progress can be viewed through the slot in the side of the tool.
4.2.
iNstallatioN
4.2.1.
Select the appropriate insertion block for the application and assemble around the new suspension bush, tighten the clamping bolts.
(fig.2).
4.2.2.
Fit the bush clamp to the insertion tool and assemble the tool using the appropriate insertion block for the application.
4.2.3.
Operate the pump to insert the bush into the suspension spring until the bush clamp comes into contact with the spring. (fig.3)
4.2.4.
Remove the bush clamp (fig.4) and continue to operate the pump until the bush is completely installed.
CV040 | Issue:1 20/11/19
fig.1
fig.2
fig.3
fig.4
sealey Group, Kempson Way, suffolk business Park, bury st edmunds, suffolk. iP32 7ar
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
eNviroNmeNt ProtectioN
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
CV040.20
Washer (Set of 4)
CV040.21
Nut m12x1.75 (Set of 4)
CV040.22
Hex Head Screw m6x1.0
CV040.23
Hex Head Screw m12x1.75
