4. operation
4.1. Made sure that loading is carried out on a hard, level and stable surface with the vehicle in gear, the parking/emergency brake on and the
engine switched off.
4.2. unfold and place the edge of the ramp against the tailgate of the vehicle.
4.3. secure the ramp to the vehicle being loaded using the safety chains. test the ramp by pulling backwards on it. Make sure it does not slide
back or disengage from the loading surface.
4.4. once the ramp is secure and the area is safe to proceed with loading, move the vehicle to be loaded behind the ramp.
4.5. Load the vehicle, make sure that the ramp is sustaining the load and not bowing from the weight.
4.6. continue until the vehicle is fully loaded. secure and then tie down the load.
4.7. unhook the safety chain and fold the ramp.
4.8. store in a clean, dry and childproof environment.
