background image

Gl53            Issue no: 1 - 14/01/13

Original Language Version

© Jack sealey limited 2013

NOTE:

 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

no liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION:

 for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group, 

Kempson Way, suffolk Business Park

Bury st. edmunds, suffolk,

IP32 7Ar

www.sealey.co.uk

W e b

email

7.     WARNING SYMBOLS

the mower should be used with due care. symbols placed strategically on various parts of the machine reminds the user of the main

precautions to be taken at point of operation. symbols and meanings are listed below. these meanings also add emphasis to the safety 

regulations and safety information given in earlier sections of these instructions

Parts support is available for this product. To obtain a parts listing and/or diagram, 

please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.

 

  

Environmental Protection.

  

recycle unwanted materials instead of disposing of them as  

   

waste. All tools, accessories and packaging should be sorted,  

   

taken to a recycle centre and disposed of in a manner which  

   

is compatible with the environment.

  

WEEE Regulations.

  

dispose of this product at the end of its working life in compliance   

   

with the eu directive on Waste electrical and electronic equipment.  

   

When the product is no longer required, it must be disposed of in an  

   

environmentally protective way. contact your local solid waste  

 

   

authority for recycling information.

caution! Keep the mains cable 

clear of cutting blade

switch off the motor and disconnect 

the mains plug before carrying out 

adjustment or cleaning work or if 

the mains lead has been snagged 

or damaged.

Summary of Contents for GL53

Page 1: ...use an RCD with portable products that are plugged into a supply which is not protected by an RCCB If in any doubt consult a qualified electrician You may obtain a Residual Current Device by contacting your Sealey dealer You must also read and understand the following instructions concerning electrical safety 1 1 1 The Electricity at Work Act 1989 requires that all portable electrical appliances i...

Page 2: ... lift off 3 3 3 Refit or change blades by the opposite approach and pull the blade from the hub tab The 25mm length setting is inboard of the 15mm setting on the same hub DO NOT remove hub NOTE The blades will only fit one way see fig 3 DO NOT force fit the blades in the wrong way WARNING Never use blades other than the spares supplied Never fit metal cutting elements Further spares available from...

Page 3: ... 2 5 Motor not running full speed with no load This can only be checked by qualified personnel consult your Sealey Dealer 6 3 Excessive vibration 6 3 1 Disconnect from mains supply 6 3 2 Check that 3 blades are fitted and pivot freely 6 3 3 Damaged blade replace 6 3 4 Plastic hub bolt has loosened re tighten bolt 6 3 5 If excessive vibration persists discontinue use and seek advice from your Seale...

Page 4: ...eration Symbols and meanings are listed below These meanings also add emphasis to the safety regulations and safety information given in earlier sections of these instructions Parts support is available for this product To obtain a parts listing and or diagram please log on to www sealey co uk email sales sealey co uk or telephone 01284 757500 Environmental Protection Recycle unwanted materials in...

Reviews: