Refer to fig.1.
4.1.
Press the on/off switch once for full light, twice for half light and three times for flashing light.
4.2. Auto-sensor
4.2.1.
Press the auto-sensor button once to turn it on, the button will glow red.
4.2.2.
Pass your hand in front of the sensor to turn the light on/off as required.
4.2.3.
Turn the auto-sensor function off by pressing the auto-sensor switch once.
4.3.
Charging
4.3.1.
Pull the plug apart and put the charge lead into the socket, (see fig.2).
Model No:
.............................................................................
HT106LED.V2
Battery: ..............................................................................3.7V 2.0Ah Li-ion
Lumen Output: .....................................................................................120lm
LED: ............................................................................................. 3W CREE
Operating Time: ......................................................................................3hrs
Charging Time: .......................................................................................4hrs
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email: sales@sealey.co.uk or telephone: 01284 757500.
2. INTRODUCTION
3. SPECIFICATION
4. OPERATION
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling
information.
Battery Removal
Unscrew the battery canister at the rear of the headband and remove the battery for correct disposal.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s
registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Hands-free 3W CREE LED spotlight with adjustable inclination to direct light as required. Features auto sensor to switch on/off just by waving
hand in front. Alternatively can be overridden to stay on/off by push button. Adjustable headband and foam brow for added comfort. Powered by
rechargeable 3.7V 2Ah Li-ion battery. Supplied with mains charger.
fig.2
© Jack Sealey Limited
WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood that common sense and caution are factors which must be applied by the operator.
Original Language Version
HT106LED.V2 Issue: 1 - 29/03/16
