4. oPeraTIoN
4.1.
Charging: Connect the USB lead to the port on the rear of the battery pack and a USB power socket. Turn on the power supply.
4.2.
Front lamp: Press on/off switch once for on, twice for flashing and third time to turn off.
4.3.
Rear lamp: Press switch on side of battery box, once for on, twice for flash and third time for off.
4.4.
dimmer switch: lever on top of power pack adjust for brightness.
4.5.
Adjust beam using lever on front lens.
5. MaINTeNaNce
5.1.
Keep the torch clean by wiping with a damp cloth.
5.2.
Store torch in a dry childproof area.
Sealey Group, Kempson Way, Suffolk business Park, bury St edmunds, Suffolk. IP32 7ar
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
eNvIroNMeNT ProTecTIoN
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee reGuLaTIoNS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
HT107R.V1 Issue 1 20/04/18
Original Language Version
© Jack Sealey Limited
