Original Language Version
fig.2
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7AR
www.sealey.co.uk
Web
LED130110P.V2 Issue: 1 - 15/04/14
fig.3
© Jack sealey Limited
clamp knob
4.1. ASSEMBLY
4.1.1. slide the high end of the stand into the black clamp as indicated in fig.3. Align the threaded insert in the stand with the hole in the black
clamp and screw in the fixing knob ensuring that the contoured washer on the threaded part fits the curvature of the clamp. Adjust the
angle of the floodlight as required and tighten the knob to grip the stand.
4.2. USE OF LIGHT.
WARNING! Ensure the mains power supply is off prior to using the floodlight.
4.2.1. Position the floodlight in the area that requires illumination.
4.2.2. this LED floodlight develops minimal heat and is not subject to the same restrictions that apply to halogen lamps that become too hot to
touch. We do however recommend that the floodlight should not be placed in cramped or restrictive situations and recommend the
following minimum distances between the light and any surface/object (fig.1).
● 500mm minimum between the top of the light and any overhead surface, or objects.
● 200mm between sides of light and end or side walls, surfaces or objects.
● 1 metre minimum between the front of the light and any object to be illuminated.
WARNING! Ensure the light is disconnected from the mains power supply when not in use.
Model No
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED130110P.V2
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9W
supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110V
Lumen output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .650lm
3. SPECIFICATION
4. ASSEMBLY
5. MAINTENANCE
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
5.1.
clean the casing externally (
not the glass
) with a moist cloth.
5.2.
DO NOT
use solvents or abrasives.
5.3.
If necessary clean the glass with alcohol and a soft cloth. Avoid touching the glass shield as handling may reduce its serviceable life and
cause the glass to crack. undo the single screw without removing it to clean internally.
5.4.
DO NOT
use the light without the glass shield.
