1. safety
8
Do not
use if the lantern appears damaged in any way.
8
Do not
charge using any other cable than that supplied with the product.
8
Do not
subject to wet or damp conditions
2. introDuction
Composite case lantern with hanging/carry handle. Operates 10 SMD LEDs that feature three selectable light settings producing up to 360
lumens of warm white light. Built-in speaker with wireless connectivity can be used with light on or off, providing up to 10 hours of playback.
Powered by a 3.7V 2.6Ah Lithium-ion battery. Supplied with USB charging cable.
3. sPecification
Model no:
........................................................................
LeD183
Lumen Output: ............................... High/Med/Low - 360/150/18lm
Operating Time: ...................................High/Med/Low - 2.5/8/65hr
LED Qty: ...........................................................................10 SMD
IP Rating: ...............................................................................IPX4
Battery: ..................................................... 3.7V 2.6Ah Lithium-ion
4. oPeration
4.1.
charging
4.1.1.
Connect the micro USB plug to the charging socket located beneath the rubber flap.
4.1.2.
Connect the other end of the charging cable to a 5V USB outlet.
4.1.3.
When charging commences, the switch shows a red aspect.
4.1.4.
When the charge is complete, the aspect changes to green. At this point, disconnect the USB lead.
4.2.
Lamp operation
4.2.1.
Press the switch successive times for: high, medium, low and off.
4.3.
Wireless speaker operation
4.3.1.
Press the switch for 5 seconds to activate the wireless connection.
4.3.2.
The speaker will emit a chime and the switch will display a flashing blue signal to show that it is searching for a pairing.
4.3.3.
A second chime and a solid blue signal denotes a successful pairing (the identity of the lantern on the input device will show as
‘SEALEY’).
4.3.4.
A further 5 second press will switch the wireless function off.
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
LED183 Issue:1 - 21/12/17
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Keep away
from rain
INSTRUCTIONS FOR:
recHarGeaBLe Lantern 10sMD LeD with
WireLess sPeaKer
MODEL NO:
LeD183
