background image

MC401A  Issue:3 (HFS) - 02/10/18)

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 sales@sealey.co.uk 

 www.sealey.co.uk

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Summary of Contents for MC401A

Page 1: ...ve ill fitting clothing Remove ties watches rings and other loose jewellry and contain long hair 9 9 Keep proper balance and footing do not overreach and wear nonslip footwear 9 9 Only use this lift on a surface that is stable level dry and capable of sustaining the load 9 9 Ensure the motorcycle is adequately secured to the lifting platform with appropriate straps 9 9 When the platform has been r...

Page 2: ...ft Foot Pedal Release Foot Pedal Locking Bar Bolts Washers Nuts Cotter Pins 4 1 Place the sliding plate 36 on the platform 35 to cover the rear wheel removal aperture 4 2 Attach loading plate 37 to end of platform using washers 23 and Cotter pins 04 4 3 Fit the front wheel vice assembly 34 to the front of the platform using bolts 33 washers 23 and nuts 30 4 4 Fit the baffle plate 32 using bolts 33...

Page 3: ...he lift foot pedal 11 to raise the lift 6 9 When the platform has been raised to the working height turn off the air valve or stop pumping and pass the locking bar 22 through the holes in the front lifting arm 38 so that the lift cannot be lowered inadvertently 6 10 When work is done check under the lift to ensure that there are no obstructions and that it is safe to lower the unit Remove the lock...

Page 4: ...No Liability is accepted for incorrect use of this product Warranty Guarantee is 12 months from purchase date proof of which is required for any claim ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste All tools accessories and packaging should be sorted taken to a recycling centre and disposed of in a manner which is compatible with the environment When the pr...

Reviews: