4.1.
clean the unit with warm, soapy water only. the probes may be cleaned by drawing warm soapy water through.
4.1.1. Always allow to dry thoroughly before storage.
4.2.
check regularly for damage and replace any damaged parts as necessary.
4.3.
When not in use store in a secure, dry, childproof location.
4. MAINTENANCE
3.3.5. To transport fluid, remove the pump and probe from the container and seal both openings securely with the anti-spill caps (fig.1.5).
3.3.6. To empty the container, remove the inlet connector and pour the contents away.
Always dispose of waste fluids responsibly and
in accordance with local authority regulations.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
NotE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7AR
www.sealey.co.uk
Original Language Version
© Jack sealey Limited
MS156 Issue: 1 - 10/07/14
