9.9.
Earthing of the workpiece.
Where the workpiece is not bonded to earth for electrical safety, nor connected to earth because of its size
and position, e.g. ships hull or building steelwork, a connection bonding the workpiece to earth may reduce emissions in some, but not
all instances. Care should be taken to prevent the earthing of the workpiece increasing the risk of injury to others or damage to other
electrical equipment. Where necessary, the connection of the workpiece to earth should be made by a direct connection to the workpiece,
but in some countries where direct connection is not permitted, the bonding should be achieved by a suitable capacitance, selected
according to national regulations.
9.10.
Screening and shielding.
Selective screening and shielding of other cables and equipment in the surrounding area may alleviate problems
of interference. Screening of the entire welding/cutting installation may be considered for special applications.
INVERTERS
Models MW140, MW140PLUS, MW150, MW170
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
Declaration of Conformity
We, the sole importer into the UK, declare that the products listed below are in conformity with the following
standards and directives.
The construction files for these products are held by the Manufacturer and may
be inspected, by a national authority, upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Welders.
14th March 2003
Signed by Mark Sweetman
10. DECLARATION OF CONFORMITY
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
01284 703534
Web
MW140.V2, MW140PLUS, MW150, MW170 - 1 - 110303
