PC40.V2 Issue 3 12/10/21
Original Language Version
© Jack Sealey Limited
3.1. ADJUSTING PC40.V2 TO CUT SMALLER PIPE SIZES
UNDER 26MM
3.1.1 The PC40 has a switch on its top surface which adjusts the
starting position of the blade to more conveniently cut pipe sizes
of 26mm or less.
3.1.2 To select the 26mm position first retract the blade by pressing the
retraction button (See fig.1-R).
3.1.3 Now squeeze the handle/trigger fully six times, then move the
switch to the 26mm position. The blade will only now retract
sufficiently to allow a 26mm tube to be inserted.
3.1.4 To return to the 42mm position first press the retraction button
which will partially retract the blade.
3.1.5 Now squeeze the handle/trigger fully three times, then move the
switch to the 42mm position. The blade will now fully retract
when the retraction button is pressed.
DO NOT SQUEEZE THE
TRIGGER HANDLE WHILST
PUSHING THE BUTTON
UNDO THE FIXING SCREWS
WITH 2.5MM ALLEN KEY AND
CAREFULLY LIFT OUT BLADE
REPLACEMENT IS A REVERSAL
OF THIS PROCEDURE
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
TO CHANGE THE BLADE
SQUEEZE THE TRIGGER
HANDLE THREE TIMES
