Sole UK Distributor
Sealey Group
,
Bury St. Edmunds, Suffolk.
01284 757500
E-mail:
sales@sealey.co.uk
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required
for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
3.2.
Attaching & Removing Dispenser to Tie Case
3.2.1 Remove the dispenser from case by gently pulling in the opposite direction (Fig. C).
3.2.2 Attach back together by pushing towards each other until you hear a click (Fig. D). Make sure the arrow on the case is facing
away from the trigger.
3.3.
Loading Spool To Tie Case
3.3.1 Remove case from dispenser.
3.3.2 Open case by gently pulling apart at the arrows. Place tie spool
in the side of the case that is marked with the word DOWN (Fig. E).
3.3.3 Insert tie through the slot in the case before closing firmly.
Make sure that the cable is not twisted.
3.4.
Loading Tie to Dispenser
3.4.1 Attach the case to the dispenser and feed the tie into the opening of the dispenser (Fig. F), until it protrudes from the
opening in the cutter (Fig. G).
3.4.2 The tip of the tie must be straight with the smooth surface facing upwards.
3.5.
Using Cable Tie Dispenser
3.5.1 Pull tie to desired length (Fig. H).
3.5.2 Wrap the tie around the object to be secured from the bottom to top (Fig. I).
3.5.3 Push the tip of the cable back into the cutter until you hear a clicking sound (Fig. J).
3.5.4 Tighten the tie by squeezing the trigger. When the desired tension is achieved cut the tie by squeezing the cutter trigger.
www.sealey.co.uk
Web
Fig. C
Fig. D
Dispenser
Tie Case
Click
Fig. E
Fig. F
Fig. G
Feed Tie Through
Smooth Side Facing Up
Tie
Cutter
Slot Uppermost
Fig. H
Fig. J
Fig. I
Pull to Desired Length
Cutter
Trigger
Top
CT01 & CT01R - 1 - 090805
