2. INTROdUCTION & SPECIFICATION
Manufactured from tough composite material suitable for use for
industrial and bodyshop use. Microchip controlled electric and air
supply circuit, which monitors power/air to the power tool and
automatically activates the suction. The same microchip overruns the
suction by 10 seconds to clear the hose of dust. supplied with
vacuum hose and accessory kit for use as a standard wet and dry
vacuum. All Dfs models require an independent power/air supply.
3. CONTENTS & PROdUCT FEATURES
Contents.
Carefully unpack the product and check contents
against the lists below. should there be any damaged or
missing parts contact your supplier immediately.
Refer to fig.1.
1.
Handle.
use to lift and steer unit on its wheels. Also
use to lift power head off the drum container when clasps
are undone.
2.
Air supply in.
using a 1/4"BsP quick fit connector the unit
can be connected to a workshop air supply or a free standing
compressor with a capacity of 10 -12cfm.
3.
Air out to air tool.
use a 1/4"BsP quick fit connector to
connect to air tools with a dust collection port. If desired an
air tool can be used independently of the vacuum function.
4.
Access to blowing port.
To use the blowing port open the
access hatch and push the flexible hose into the aperture
against spring pressure until it latches.
5.
Suction port.
To connect the flexible hose push it into the
aperture until it latches.
6.
55ltr. drum.
Collection container for both wet and dry
functions of the vacuum cleaner.
7.
Castor wheels.
Allow the unit to be easily steered.
8.
Cable stowage.
single cable stowage point.
9.
Filter cover release button.
Gives access to the foam air
inlet filter. see fig.7.
10.
Power head.
Contains the electric motor and fan, the
controls for the unit, plus cartridge filter mounting and cut off
float when the unit is used for wet suction.
11.
Power cable.
Connect to a power supply protected by a
suitable fuse.
12.
Clasp.
One clasp either side of the drum is use to retain the
power head on the container.
13.
Wheels.
Allow easy transportation of the unit from one place
to another indoors on smooth surfaces.
14.
Power socket.
13amp socket for electric power tool.
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .dFS55
Motor Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200W
Power Tool Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1500W
supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V
Drum size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55ltr
Hose Ø: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ø10-35mm Adaptor
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16kg
Replacement filters: . . . . . . . . . . . . . . . . . . . . . . . . . see section 10
fig.2
fig.1
Keep hands and body clear of the sanders working parts when
operating the dust free vacuum system.
DO NOT operate the dust free vacuum system when you are
tired or under the influence of alcohol, drugs or intoxicating
medication.
1.6 SAFETY OF OTHERS
Keep children and unauthorised persons away from the working
area, and DO NOT allow untrained persons to operate the dust
free vacuum system.
1.7 GENERAL SAFETY
familiarise yourself with the applications, limitations and hazards
peculiar to the dust free vacuum system.
Ensure the system is regularly emptied and the filter is cleaned.
failure to do so may damage the unit and invalidate your warranty.
When not in use turn off the mains power supply.
store the dust free vacuum system in a safe, dry, childproof area.
DO NOT use the dust free vacuum system for any purpose other
than that for which it is designed.
DO NOT pull or yank the electrical leads, air hoses or vacuum
extraction hoses attached to the dust free vacuum system.
DO NOT leave the dust free vacuum system operating unattended.
WARNING!
DO NOT use the dust free vacuum system to
vacuum combustible, poisonous or toxic materials, including
acids, solvents and asbestos.
WARNING!
The maximum wattage of any electrical tool operated
from the dust free vacuum system must not exceed 1500 watts.
Original Language Version
Dfs55 Issue: 2 - 17/02/10
