Sealey POWER PRODUCTS SA810, Quick Start Manual

01284 757500

sales@sealey.co.uk

01284 703534

Sole UK Distributor,

Sealey Group,

Bury St. Edmunds, Suffolk.

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component

parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this equipment. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION: 

For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address,

including postcode.

Web

e-mail

www.sealey.co.uk

SA810, SA812 & SA813 - 1 - 130303

01284 757500

sales@sealey.co.uk

01284 703534

Sole UK Distributor,

Sealey Group,

Bury St. Edmunds, Suffolk.

Web

e-mail

www.sealey.co.uk

2. INTRODUCTION & SPECIFICATIONS

These air hose reels have a hard wearing composite casing with retracting air hose reel and

ratchet and free-running operation, enabling easy access to locations within the extended air hose

range. The reels come complete with an attachment bracket for wall, floor or ceiling mounting.

SA810

SA812

SA813

Hose Length  . . . . . . . . . . . . . . . . . . .6mtr . . . . . . . . . . . . . . . .10mtr  . . . . . . . . . . . . . . . .8mtr

Hose BoreØ  . . . . . . . . . . . . . . . . . . .6mm  . . . . . . . . . . . . . . . .6mm  . . . . . . . . . . . . . . . .8mm

Maximum Pressure  . . . . . . .10 bar/150psi . . . . . . . . . .10 bar/150psi  . . . . . . . . .10 bar/150psi

Hose Type  . . . . . . . . . . . . . .Polyurethane  . . . . . . . . . .Polyurethane . . . . . . . . . .Polyurethane

Inlet - Outlet   . . . . . . . . . . . . . . . .1/4”BSP . . . . . . . . . . . . . .1/4”BSP  . . . . . . . . . . . . .1/4”BSP

3. INSTALLATION

p

p

WARNING! Ensure that the hose is disconnected from the air supply during installation.

Do not position the hose in direct sunlight or in areas of extreme heat or cold.

3.1.

Ensure that the structure to which the air hose is to be fixed is of sound construction and

that the securing point will hold the working strain of the hose when in use.

3.2.   Position the supporting bracket on the surface and mark out the positions of the mounting holes,

having checked that the main body will turn sufficiently to allow the hose to be extended

without rubbing on either side of the air hose housing.

3.3.   Drill and plug the structure and screw mount the support bracket.

3.4.   Before use, check that all fixings are safe and secure, and that the hose extends and

retracts with ease.

3.5.

The hose reel is supplied set for ratchet operation. To disengage the ratchet, remove the

side panel covering the air inlet and unhook the spring. Refit the side panel.

Note:

Keep the spring safe so that ratchet operation can be restored if required.

4. MAINTENANCE & STORAGE

4.1.

Maintenance

p

p

WARNING! Before attempting maintenance or inspection vent any pressure remaining

in the hose.

4.1.1. To ensure reliable operation, clean the hose and casing regularly.  

DO NOT

spray or wet

the unit, but clean with a cloth and warm water. 

DO NOT

use solvents or detergents, as

these may cause permanent damage. 

4.1.2. The hose reel is lubricated for life and does not require special maintenance. If the casing

needs to be opened, consult your nearest authorised service agent. 

p

p

WARNING! DO NOT attempt to loosen, or remove, any casing screws yourself.

4.1.3. Replacement of the supply hose should be carried out by skilled personnel only, consult

your nearest authorised service agent.

4.2.

Storage

4.2.1. Ensure that the hose reel is clean and dry. Place it in a dark, dry, childproof location,

where the temperature will remain reasonably stable. 

DO NOT

store in a nylon, or plastic,

bag as this will encourage condensation.

Item 

Part No.

Description

1

SA810.01

Left Cover

3

SA810.03

Spring

4

SA810.04

Spring Cover

5

SA810.05

Seat

6

SA810.06

Axle

7

SA810.07

Spacer

8

SA810.08

Collar

9

SA810.09

O-ring

10

SA810.10

O-ring

11

SA810.11

Cover

12

SA810.12

Spacer

13

SA810.13

Screw

14

SA810.14

O-ring

15

SA810.15

Connector

16

SA810.16

Clip

17

SA810.17

Nut

18

SA810.18

Screw

19

SA810.19

Air Pipe - SA810

19

SA812.19

Air Pipe - SA812

19

SA813.19

Air Pipe - SA813

Item 

Part No.

Description

20

SA810.20

Clip

21

SA810.21

Screw

24

SA810.24

Rubber Sleeve

25

SA810.25

Connector

26

SA810.26

Axle

27

SA810.27

Spacer

28

SA810.28

Collar

29

SA810.29

Pawl

30

SA810.30

Spring

31

SA810.31

Screw

32

SA810.32

Spacer

33

SA810.33

Shelf

34

SA810.34

Spacer

35

SA810.35

Screw

36

SA810.36

Right Cover

37

SA810.37

Inlet Pipe

38

SA810.38

Connector

39

SA810.39

Screw

40

SA810.40

Cover

42

SA810.42

Spring

All Items, except Item 19, are

common to all three models.

Issue:

1

Date Issued: 1303034

PARTS LIST FOR:

AIR HOSE REELS

Models: 

SA810, SA812 & SA813