6.2.9.1. If the vehicle’s centre of gravity is aligned with the axis of the mini lift, it can tend to tilt either forward or back. To avoid this, it is
imperative to use axle stands and the anti-tilting arm.
6.2.9.2. In addition, it is
ESSENTIAL
that the axis of the mini lift is moved from the vehicle’s axis of gravity, in order to place more load on the
wheels that remain on the ground.
6.2.9.3. If one end of the vehicle is raised and the user wishes to work on the other end, you must lower it and then lift it again having changed the
position of the mini lift to change the distribution of the load and lift the desired end.
6.2.10. Safety Nut
6.2.10.1. The drive nut for the load can wear over time or if it is badly lubricated. In this case, a safety device holds the load, but it is no longer
possible to lift or lower it.
8
DO NOT
try to repair the mini lift so that you can continue to use it: only Sealey must be entrusted with the repair.
7. STORAGE
7.1.
The Mini Lift must be stored on the housings or fixed to the wall with brackets (not supplied.) Store in a dry, condensation free place.
8.
MAINTENANCE
8.1.
Grease the drives in the drive housings and the moving parts at least four times a year, or more often in the case of intensive use.
8.2.
To grease the drives, take out the 2 screws and open the covers of the housings.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Original Language Version
© Jack Sealey limited
PPl01 | Issue 3 (4) 18/11/19
