Instructions for:
BMW TRAILING ARM BUSH TOOL
Model No: VS4464
1.
SAFETY INSTRUCTIONS
2.
INTRODUCTION & APPLICATIONS
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to
these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND
WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE
.
3.
CONTENTS
VS4464 - 1 - 050506
!
WARNING!
Ensure Health and Safety, local authority
and general workshop practice regulations are
adhered to when using tools.
"
DO NOT
use tools if damaged.
#
Maintain tools in good and clean condition for best
and safest performance.
#
Ensure that a vehicle which has been jacked up is
adequately supported with axle stands and that
the wheels are chocked.
#
Wear approved eye protection. A full range of
personal safety equipment is available from your
Sealey dealer.
#
Wear suitable clothing to avoid snagging. Do not
wear jewellery and tie back long hair.
"
DO NOT use air tools to operate the force nut.
IMPORTANT:
The force screw must be kept well
lubricated
IMPORTANT:
These instructions are provided as
a guide only. Always refer to the vehicle manufacturer’s
service instructions, or a proprietary manual, to
establish the current procedure and data.
2.2 Applications:
BMW:
3 Series - E36 and E46 including E46 Compact.
2.1 Introduction
VS4464 removes and installs the bush on the rear trailing
arm of BMW 3 Series as detailed under Applications. The
design of the bush has changed, and this tool will remove
both "old style" bushes and new "slotted" bushes, and will
install the "slotted" bushes.
1
VS4464.01
Force Screw
2
VS4464.02
Force Nut Assembly
3
VS4464.03
Bridge Piece
4
VS4464.04
Thrust Plate
5
VS4464.05
Lock Nut
6
VS4464.06
Compressor Sleeve
7
VS4464.07
Removal/Installer Plate
8
VS4460.07
Flange Nut
VS4464 - 1 - 050506
01284 757500
Web
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
ITEM
PART NO.
DESCRIPTION
1
VS4464.01
Force Screw
2
VS4464.02
Force Nut Assembly
3
VS4464.03
Bridge Piece
4
VS4464.04
Thrust Plate
5
VS4464.05
Lock Nut
6
VS4464.06
Compressor Sleeve
7
VS4464.07
Removal/Installer Plate
8
VS4460.07
Flange Nut
Issue: 01
Issue Date: 050506
Parts for:
BMW TRAILING ARM BUSH TOOL
Model No: VS4464
Sole UK Distributor
Sealey Group,
Bury St. Edmunds,Suffolk.
