background image

7.6.    

Tighten the nuts and then secure with the second (lock) nut. 

7.7.    

Adjust roll spindle (3) to the beam.

8.  RESPONSIBILITIES

 

The owner and/or operator shall study these instructions and retain them for future use.

 

a) Understanding instructions and warnings.

 

The owner and/or operator shall understand the operating instructions and warnings before operating the trolley.

 

Warning information must be emphasised and understood. 

 

If the operator is not fluent in english, the product instructions and warnings must be read to, and discussed with, the operator in the  

 

operator’s native language by the owner, making sure the operator understands the contents.

 

b) Damaged Trolleys.

 

Any trolley which appears to be damaged, badly worn, or operates abnormally mUsT Be RemoVed FRom seRVICe!    

 

 

It is recommended that necessary repairs be made by an authorised service agent.

 

c) End of service.

 

Through years of normal wear, the trolley will eventually become unserviceable. When this happens dispose of in accordance with    

 

local authority regulations.

fig. A

1

1

2

3

4 5

6

7

PT1000G.V2, PT3000G.V2 |  Issue:2(H,F)  07/03/18

Original Language Version

© Jack sealey limited

Summary of Contents for PT1000G.V2







Reviews: