BOTTLE JACKS WITH TELESCOPIC RAM
MODEL NO’S:
PTBJ5S, PTBJ10S, PTBJ12S
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
ALWAYS USE LOAD RATED STANDS TO SUPPORT
LIFTED LOADS
9
Read, study and understand all warnings and operating instructions prior to use. The usershall work in accordance with this manual.
▲
DANGER!
Use the jack for lifting and lowering only.
▲
DANGER!
DO NOT
place any part of the body beneath the lifted load unless the load is fully supported by rated axle stands.
▲
DANGER!
DO NOT
place any part of the body beneath the load during lifting or lowering.
8
DO NOT
exceed the rated capacity of the jack, load or maximum stroke.
8
DO NOT
adjust the overload valve, modify or use the jack for any purpose other than for which it is designed
(lifting and lowering
mechanical devices).
8
DO NOT
leave elevated loads unattended, unless safe from others in a garage or workshop.
8
DO NOT
modify the jack.
9
The operator must watch the jack and the load during all movements.
9
Ensure the jacking area is solid and level. Increase the jacking area with a solid flat plate (steel) if jacking on tarmacadam or grass.
9
Keep others away from the work area.
9
Lift only on areas of the vehicle specified by the vehicle manufacturer. Refer to manufacturer’s instructions on proper lifting.
9
Centre load on saddle prior to lifting.
9
Some vehicles require an adapter to properly engage the frame for lifting.
9
Use only attachments, restraints or adaptors supplied by the manufacturer.
8
DO NOT
move or dolly the the vehicle whilst on the jack.
9
Ensure the jacking area is clutter free and that there is adequate lighting.
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be applied by the operator.
WARNING! Failure to heed these warnings may result in personal injury and/or property damage.
2. INTRODUCTION
Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allows a reduced closed height without compromising maximum lift
height. Fitted with safety overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied
with 3 pcs-handle.
3. SPECIFICATION
4. OPERATION
Please remember a jack is a lifting and lowering device and is not designed to support a load. Never get underneath a
vehicle supported only by a jack; your life is at risk. We stock a comprehensive range of axle stands, please see relevant
catalogue section for full details.
The jack is not limited to vehicle use only, with many applications in the engineering and construction industries.
4.1.
The owner and/or operator is responsible for providing maintenance, maintaining decals or warning labels whilst in use,
Maintaining the unit in good working order. If the owner and/or operator is not fluent in English, the product warnings
and instructions shall be read in the operator’s native language by the purchaser/owner or his deputy.
Make sure operator understands its contents. Safety information shall be emphasised and understood prior to
usage. The jack shall be inspected as per the instruction manual prior to use.
Refer to
instruction
manual
Wear safety
footwear
PTBJ5S, PTBJ10S, PTBJ12S Issue:1 19/07/22
Original Language Version
© Jack Sealey Limited
Model No:
PTBJ5S
PTBJ10S
PTBJ12S
Capacity
5tonne
10tonne
12tonne
Hydraulic Lift
270mm
240mm
265mm
Maximum Height
500mm
520mm
590mm
Minimum Height
230mm
210mm
235mm
Screw Extension
N/a
70mm
90mm
