Jack will not lift to full height
Jack will not hold the load
lift arm will not lower
Jack feels spongy when lifting
check oil level.
call for customer service
call for customer service
refer to air purge procedure at section 3
oil level low
release valve not closing
Hydraulic jack oil is contaminated
Pump valves not sealing
cylinder ram binding
cylinder ram binding
Parts worn
Internal component damage
Broken or unhooked return spring
lift arm linkage either bent or binding
system requires purging
PROBLEM
CAusE
REMEdY
7. FAuLT FINdING
notE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
sole uK distributor, sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
rJA1500 Issue: 2 - 20/10/09
