F
.
Recheck fluid level and re-fill as needed.
g.
Replace the Fill Screw.
6.4.
After each use, wipe with a clean cloth. Store the Jack indoors out of children’s reach.
7. TrouBlesHooTinG
WarninG:
To PReVenT SeRIoUS InJURY: Use caution when troubleshooting a malfunctioning jack. Stay well clear of the
supported load. Completely resolve all problems before use. If the solutions presented in the Troubleshooting guide
Do noT
solve
the problem, have a qualified technician inspect and repair the jack before use.
7.1.
After the jack is repaired: Test it carefully without a load by raising and lowering it fully, checking for proper operation, BeFoRe
ReTURnIng THe JACK To oPeRATIon.
PoSSIBle SYMPToMS
Potential Solution
(Make certain that the Jack is not supporting a load while attempting
a solution.)
Jack will
not lift at
its weight
capacity
Saddle
lowers
under
load
Pump
stroke
feels
spongy
Saddle
will not
lift all the
way
Handle
moves up
when jack
is under
load
Fluid
leaking
from fill
plug
x
x
Check that Release Valve is fully closed.
Jack may require bleeding - see instructions in section 4.
x
x
x
V
alves may be blocked and may not close fully. To flush the valves:
1. lower the Saddle and securely close the Release Valve.
2. Manually lift the saddle several inches.
3. open the release valve by turning the Handle counter-clockwise
and force the saddle down as quickly as possible.
x
x
x
J
ack may be low on hydraulic fluid. Check fluid level and refill if
needed - see instructions in section 4.
Jack may require bleeding - see instructions in section 4.
x
U
nit may have too much hydraulic fluid inside. Check fluid level and
adjust if needed - see instructions in section 4.
sealey Group, kempson Way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
enVironmenT proTecTion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: guarantee is 12 months from purchase date, proof of which is required for any claim.
RJAS1500.V2 Issue 1 09/10/18
Original Language Version
© Jack Sealey limited
