WARNING! – Risk of Hand Arm Vibration Injury.
These tools may cause Hand Arm Vibration Syndrome if their useage is not managed adequately.
These tools are subject to the vibration testing section of the Machinery Directive 2006/42/EC.
These tools are to be operated in accordance with these instructions.
SA2403
Measured vibration emission value (a): . . . . . . . . . .2.06 m/s²
Uncertainty value (k):. . . . . . . . . . . . . . . . . . . . . . . . . .0.42 m/s²
SA2
Measured vibration emission value (a): . . . . . . . . . .5.67 m/s²
Uncertainty value (k):. . . . . . . . . . . . . . . . . . . . . . . . . .0.64 m/s²
SA21/S.V2
Measured vibration emission value (a): . . . . . . . . . .6.56 m/s²
Uncertainty value (k):. . . . . . . . . . . . . . . . . . . . . . . . . .0.69 m/s²
Please note that the application of the tools to a sole specialist task may produce a different average vibration emission. We recommend that a
specific evaluation of the vibration emission is conducted prior to commencing with a specialist task.
A health and safety assessment by the user (or employer) will need to be carried out to determine the suitable duration of use for each tool.
NB:
Stated Vibration Emission values are type-test values and are intended to be typical.
Whilst in use, the actual value will vary considerably from and depend on many factors.
Such factors include; the operator, the task and the inserted tool or consumable.
NB:
ensure that the length of leader hoses is sufficient to allow unrestricted use, as this also helps to reduce vibration.
The state of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase the risk of Hand Arm Vibration
Syndrome.
Health surveillance.
We recommend a programme of health surveillance to detect early symptoms of vibration injury so that management procedures can be modified
accordingly.
Personal protective equipment.
We are not aware of any personal protective equipment (PPE) that provides protection against vibration injury that may result from the
uncontrolled use of these tools. We recommend a sufficient supply of clothing (including gloves) to enable the operator to remain warm and dry
and maintain good blood circulation in fingers etc. Please note that the most effective protection is prevention, please refer to the Correct Use and
Maintenance section in these instructions. Guidance relating to the management of hand arm vibration can be found on the HSC website
www.hse.gov.uk - Hand-Arm Vibration at Work.
