background image

10-50MM CAPACITY AIR NAIL GUN

model no: 

SA791.V3

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAfeTY  

 

‰

    

WARNING! DO NOT

 use the nail gun if damaged, has missing parts or is thought to be faulty. Contact your Service Agent.

 

‰

 

WARNING!

 disconnect from the air supply before loading or servicing.

 

‰

  

WARNING!

 Always wear approved eye, face and hand protection when operating the nail gun.

 

‰

  

WARNING!

 Check correct air pressure is maintained and not exceeded. We recommend 60 to 100psi. 

 

8

  

DO NOT

 use the nail gun for a task it is not designed to perform.

 

8

  

DO NOT

 operate the nail gun near flammable substances or flammable containers.

 

8

  

DO NOT

 use the nail gun unless you have been instructed in its use by a qualified person.

 

8

  

DO NOT

 carry the nail gun by the air hose, or yank the hose from the air supply. 

 

8

  

DO NOT

 operate the nail gun if you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

 

DO NOT 

carry the nail gun with your hand on the power trigger in order to avoid unintentional firing.

 

8

  

DO NOT

 direct the nail gun or the air from the air hose at yourself or others.

 

8

  

DO NOT

 load bent or damaged nails into the magazine.

 

 

DANGeR!

 When putting the nail gun down, ensure that the trigger safety slide is not fouled, risking accidental firing.

 

9

   maintain the nail gun in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised    

 

  parts may be dangerous and will invalidate the warranty.

 

9

   Keep the air hose away from heat, oil and sharp edges. Check the air hose for wear before each use and ensure that all    

 

  connections are secure.

 

9

   only use supplied 18SWG x 15-50mm Brad nails. Ask your Sealey dealer for further supplies.  

 

9

   Wear approved safety eye/face shield, ear defenders and hand protection.

 

9

  Follow all workshop safety rules, regulations, and conditions when using the nail gun.

 

9

   maintain correct balance and footing. ensure the floor is not slippery and wear non-slip shoes.

 

9

   Keep children and non essential persons away from the working area.

 

9

   When not in use, disconnect from the air supply, remove the strip nails from the magazine and store cased in a safe, dry, childproof    

 location. 

 

‰

 

WARNING! 

The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that  

 

  may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into    

 

  this product, but must be applied by the operator.   

 

2.  INTRODUCTION

 

Professional air nailer with lightweight aluminium body and rubber grip handle. Safety trigger device to prevent accidental firing of nails.  

 

Supplied in storage case with oiler and starter pack of nails. 

3.  SPeCIfICATION

Model No: ..............................................................SA791.V3

nail Capacity:. ..............................................10-50mm 18SWG

maximum Pressure:.. .....................................................100psi

operating Pressure ...................................................60-100psi

Air Inlet Size:. .............................................................. 1/4”BSP

noise Power: ............................................................... 99dB(A)

noise Pressure: ........................................................... 92dB(A)

Vibration: .................................................................... 2.8m/s²

Uncertainty: ................................................................ 1.5m/s²

SA791.V3     Issue 1     29/10/19

Original Language Version

© Jack Sealey limited

      Refer to

   instructions

 Wear eye

protection

 Wear protective

gloves

 Wear ear

protection

 Wear safety

footwear

 Keep People

away        

Summary of Contents for SA791.V3

Page 1: ...re that the trigger safety slide is not fouled risking accidental firing 9 9 Maintain the nail gun in good condition and replace any damaged or worn parts Use genuine parts only Unauthorised parts may be dangerous and will invalidate the warranty 9 9 Keep the air hose away from heat oil and sharp edges Check the air hose for wear before each use and ensure that all connections are secure 9 9 Only ...

Page 2: ...r 5 1 1 Slide the magazine cover shut until it clicks into place behind the catch 5 1 2 Before connecting to an air supply ensure that the trigger safety slide is not depressed See the 6mm safety dimension in fig 2 5 1 3 Connect the air line to the nail gun as described in Section 4 5 1 4 The operating trigger is normally inoperable and cannot be used until the trigger safety slide is depressed Th...

Page 3: ...ils not fully penetrating work piece Timber hardness or knots may be a factor Adjust the air pressure between 60 100psi 7 Maintenance WARNING Disconnect the nail gun from the air supply before refilling servicing or performing maintenance Replace or repair damaged parts Use genuine parts only Unauthorised parts may be dangerous and will invalidate the warranty 7 1 If the air system does not have a...

Page 4: ...ware of any personal protective equipment PPE that provides protection against vibration injury that may result from the uncontrolled use of this tool We recommend a sufficient supply of clothing including gloves to enable the operator to remain warm and dry and maintain good blood circulation in fingers etc Please note that the most effective protection is prevention please refer to the Correct U...

Reviews: