5. opeRatioN
5.1.
extending the hose
5.1.1.
Pull the hose out slowly to the length required, release the tension and the hose should lock into position, if it starts to retract then
pull the hose out slightly further to engage the locking mechanism of the reel.
WaRNiNG! Do Not
over extend the hose as this will cause the mechanism to malfunction, preventing the hose from retracting.
5.2.
Retracting the hose
5.2.1.
To release the hose and allow it to automatically rewind, pull the hose out from the locked position and then release the tension on
the
hose.
WaRNiNG!
The reel tension is factory set, if any adjustment is required, contact an authorised service agent.
6. MaiNteNaNce & stoRaGe
6.1.
Maintenance
WaRNiNG!
Before attempting maintenance or inspection, vent any pressure remaining in the hose.
6.1.1.
To ensure reliable operation, clean the hose and casing regularly.
Do Not
spray or wet the unit, only clean with a cloth and warm
water.
Do Not
use solvents or detergents, as these may cause permanent damage.
6.1.2.
The hose reel is lubricated for life and does not require special maintenance. If the casing needs to be opened, consult your
nearest authorised service agent.
WaRNiNG!
Do Not
attempt to loosen, or remove any casing screws.
6.1.3.
Replacement of the supply hose should be carried out by skilled personnel only, consult your nearest authorised service agent.
6.2.
storage
6.2.1.
ensure that the hose reel is clean and dry. Place it in a dark, dry, childproof location, where the temperature will remain reasonably
stable.
Do Not
store in a nylon, or plastic bag, as this will encourage condensation.
sealey Group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7aR
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
eNViRoNMeNt pRotectioN
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
fig.1
SA811,SA812.V3,SA813.V3,SA814.V2 | Issue 2 (HF) 28/03/18
Original Language Version
© Jack Sealey limited
