5.
MAINTENANCE & STORAGE
5.1 Maintenance
"
WARNING! Before attempting maintenance or inspection vent any pressure remaining in the hose.
5.1.1
To ensure reliable operation, clean the hose and casing regularly.
DO NOT
spray or wet the product, but clean with a cloth and
warm water.
DO NOT
use solvents or detergents, as these may cause permanent damage.
5.1.2
The hose reel does not require special maintenance as it is lubricated for life. If the product needs to be opened, consult your
nearest authorised service agent.
"
WARNING: DO NOT
attempt to loosen, or remove, any casing screws yourself.
5.1.3
Replacement of the supply hose should be carried out by skilled personnel only. Consult your nearest authorised service agent.
5.2 Storage
5.2.1
Should you wish to store the air hose, ensure it is clean and dry. Place the item in a dark, safe, dry, childproof location, where the
temperature will remain reasonably stable.
DO NOT
store in a nylon, or plastic, bag as this will encourage condensation.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
4.1.
Extending the hose.
4.1.1. As the hose is pulled out from the reel the action of the ratchet mechanism can be heard alternating between the usual clicking sound and a
short period of silence. If the tension on the hose is released whilst the ratchet is clicking the hose will remain extended. If the tension on the
hose is released during silent operation the hose will retract. To stop the hose retracting pull it out again a little until you hear the ratchet clicking.
4.2.
Retracting the hose.
4.2.1. To release the hose and allow it to automatically rewind, pull the hose out from the locked position until the clicking stops and then release
the tension on the hose. Do not let go of the hose but keep hold of it and guide the end back to the reel.
"
WARNING!
The reel tension is factory set, if any adjustment is required contact an authorised service agent.
DO NOT
remove any of
the black spring cover screws.
4.
OPERATION
6.
DECLARATION OF CONFORMITY
Declaration of Conformity
We, the sole importer into the UK, declare that the products listed here
are in conformity with the following standards and directives
The construction files for these products are held by the Manufacturer and may be inspected, by a national authority,
upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products
1st August 2006
RETRACTING AIR HOSE REELS SA894.V3
AND SA895.V3
93/68/EEC CE Marking Directive
98/37/EC Machinery Directive
Signed by Tim Thompson
SA894.V3, SA895.V3 - 1 - 010806
