6. tROUblE ShOOtiNg
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPORtaNt:
no liability is accepted for incorrect use of this product.
WaRRaNtY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
iNFORMatiON:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK distributor, Sealey group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Fault
Cause
Remedy
Pressure drop in the tank.
Air leaks at connections.
run compressor to max. pressure, switch off.
Brush soap solution over connections and look for
bubbles. tighten connections showing leaks.
If problem persists contact Authorised service Agent.
Pressure switch valve leaks when compressor is idle. non-return valve seal defective.
Discharge all tank pressure. referring to fig.8,
unscrew valve cap 'A'. clean rubber disc 'B' and its
seat. refit all parts accurately.
compressor stops and does not restart.
Power failure.
motor failure.
check electricity supply and fuse.
contact Authorised service Agent.
compressor does not stop at max pressure.
Pressure switch fault.
contact Authorised service Agent.
compressor does not reach max pressure.
filter clogged.
Head gasket or valve fault.
replace filter element.
contact Authorised service Agent.
compressor noisy with metallic knock.
Low oil level.
Bearing or piston damage.
turn off and top up oil immediately.
contact Authorised service Agent.
fig.8
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email sales@sealey.co.uk or phone 01284 757500.
sAc42755BLn, sAc72775BLn Issue: 2 - 22/02/12
Original Language Version
Summary of Contents for SAC42755BLN
Page 6: ......
