noTe:
this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. children shall not play with the appliance. cleaning and user
maintenance shall not be made by children without supervision.
2. InTroducTIon
manufactured from durable composite material, ergonomically designed to pivot on a 180° axis, maximising the volume and direction of
airflow. These models can also be wall mounted. Featuring three speed settings, which can ideally be used for intense cooling power or as an
air circulator for the whole room. Fitted with BS fully approved plug.
3. specIfIcaTIon
model no. . .................................................................. sff08
fan diameter. ......................................................... Ø200mm
speeds. ...............................................................................
3
Power. ............................................................................
35W
supply. .........................................................................
230V
Height. ....................................................................... 290mm
4. operaTIon
4.1.
The fan can be used either free-standing or wall-mounted.
4.2.
Wall mounting
4.2.1.
Hold the assembled shelves in the desired position and mark the wall through the
two holes in the base.
4.2.2.
remove from wall.
4.2.3.
Use proprietory wall fixings that are suitable for the type of wall and the weight of
the fan. (not supplied)
4.2.4.
Drill two holes suitable for the wall fixings.
4.2.5.
locate the keyhole slots in the fan base over the screw heads and slide the base
down.
4.2.6.
Tighten screws down over base, taking care not to over-tighten.
4.3.
the fan head will lock in 10° increments to allow the most effective position to
be selected.
4.4.
The fan is supplied with a switch providing ‘off’ and 3 speed settings.(fig.2)
4.5.
When the fan is being used free-standing, ensure that the switch is in the ‘off’ position before connecting to mains power.
4.6.
Ensure that the flex between the mains plug and the fan is routed so as not to present a trip hazard.
5. MaInTenance
WarnInG!
ensure that the fan is disconnected from the mains power supply before attempting any of the following:
5.1.
use a soft, damp cloth to clean the fan.
do noT
immerse the fan in water and never allow water to drip onto the motor housing.
do
noT
use solvents, petroleum, paint thinner or other chemicals to clean the fan.
5.2.
to clean the fan blade, undo the four screws on the back and remove the front grille. clean the blade with a slightly damp cloth.
replace the front grille and refit the screws.
5.3.
should the motor, switch or the power lead require service or maintenance contact your local service agent.
5.4.
When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof location.
5.5.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMporTanT:
no liability is accepted for incorrect use of this product.
WarranTy:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
s
ole UK Distributor, Sealey Group.
K
empson Way, Suffolk Business Park,
B
ury st. edmunds, suffolk.
i
P32 7AR
www.sealey.co.uk
sales@sealey.co.uk
01284 757500
01284 703534
s
FF08 | Issue 1 16/02/17
Original Language Version
© Jack sealey limited
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
fig.1
fig.2
