background image

12” OSCILLATING DESK TOWER FAN 
2-SPEED

MODEL NO: 

STF12C

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 
instructions, and properly maintained, give you years of trouble free performance.

I

MP

PO

R

RTA

TANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

TH

HE

P

PR

O

ODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PE

ER

S

SON

NAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

1.1. ELECTRICAL 

SAFETY

WARNING!

 It is the user’s responsibility to check the following:

 

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and    

 

all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with  

 

 

all electrical products. You may obtain an RCD by contacting your local Sealey Stockist. 

 

If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable  

 

 Appliance 

Test) 

tested.

 

Electrical safety information, it is important that the following information is read and understood.

1.1.1. 

  

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 

1.1.2. 

  

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

1.1.3.   Important

: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is 

fi

 tted with the    

 

correct fuse - see fuse rating in these instructions.

  DO 

NOT

 pull or carry the appliance by the power cable.

DO NOT

 pull the plug from the socket by the cable. Remove the plug from the socket by maintaining a 

fi

 rm grip on the plug.

  DO 

NOT

 use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or replaced immediately by a   

 quali

fi

 ed electrician.

1.1.4. 

  

This product is 

fi

 tted with a BS1363/A 13 Amp 3 pin plug. 

 

If the cable or plug is damaged during use, switch the electricity supply and remove from use. 

 

Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a quali

fi

 ed electrician.

 

Class II products are wired with live (brown) and neutral (blue) only, and are marked with the 

 

Class II symbol;

 

A) Connect the BROWN live wire to the live terminal ‘L’.

 

B) Connect the BLUE neutral wire to the neutral terminal ‘N’.

 

C) After wiring, check that there are no bare wires and ensure that all wires have been correctly

 connected. 

 

Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. 

  DO 

NOT 

connect either wire to the earth terminal. 

 

Sealey recommend that repairs are carried out by a quali

fi

 ed electrician. 

1.2. GENERAL 

SAFETY

1.3. 

Disconnect the fan from the mains power when not in use and before servicing or performing any maintenance.

Use the fan in dry areas only.

DO NOT

 use in wet or areas with high condensation such as showers, pools etc.

DO NOT

immerse the fan in water or any other liquid.

WARNING!

If the fan falls into water or any other liquid, immediately disconnect from the mains power supply. 

DO NOT

 touch the fan  

  until the mains power supply has been disconnected.

Always disconnect the fan from the power supply when moving it from one location to another.

 Ensure 

the fan is stood on a level surface.

Before use ensure that there is nothing nearby that will be damaged or displaced by the stream of air.

Keep the fan clean and maintained in good condition. For motor service contact an authorised Sealeys service agent.

Use recommended parts only. Unapproved parts may be dangerous, and will invalidate your warranty.

DO NOT

 operate the fan where there are explosive or flammable gases, fumes or other hazardous substances.

DO NOT

 place the fan near an open flame, cooking or other heating appliances.

DO NOT

 stand the fan on the power cable. 

DO NOT

insert any objects through the fan guard.

DO NOT

 cover the fan when in use.

DO NOT

 run the power cord under carpeting.

DO NOT

 route the power cord under furniture or appliances.

   Avoid trip hazards by arranging the power cord away from traffic areas.

DO NOT

allow children to operate the fan.

DO NOT

stand the fan where it may be knocked over or off a surface.

DO NOT

 use the fan outdoors, for household use only.

Recommended fuse rating

3 Amp

STF12C  Issue 1 01/12/21

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

Do not cover

Indoor use

only

Reviews: