Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
TBL450 Issue1 - 14/12/17
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
INSTRUCTIONS FOR:
TOOLBOX LIGHT RECHARGEABLE
15 SMD LED
LITHIUM-ION
MODEL NO:
TBL450
1. SAFETY
DO NOT
shine lamp directly into your, other person’s or animal’s eyes.
DO NOT
allow children to use the lamp.
Maintain the lamp in good condition.
DO NOT
use the lamp if the lamp if damaged.
When not in use store the light in a safe, dry, childproof location.
2.
I
INTRODUCTION
Robust aluminium housing incorporating 15 SMD LED’s to illuminate the trays in a toolbox. With a width of 450mm the light is fitted with two sliding
magnetic brackets which can rotate 180° to direct the light as required, whilst also giving the flexibility to attach the light to any ferrous metal
avoiding badges and logos. Features two light settings with an operating time of up to 12 hours. Powered by a rechargeable 3.7V 2.2Ah Lithium-ion
battery and includes an LED charging indicator. Supplied with a 1mtr USB charging cable.
3.
S
SPECIFICATION
Model no:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TBL450
Battery:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7V 2.2Ah Lithium-ion
LED Quantity:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 SMD LED
Lumen Output High/Low: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150/100lm
Operating Time: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6/12hr
Charging Time:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3hr
Dimensions (W x D x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .450 x 50 x 30mm
4.
op
OPERATION
4.1.
Charging
4.1.1.
Insert the mini USB plug into the charger socket adjacent to the on/off switch.
4.1.2.
Couple the USB plug on the other end into a 5V USB outlet.
4.1.3.
The charge indicator LED will show red whilst charging.
4.1.4.
When fully charged, the charge LED will show green. At this point disconnect the light from the power source.
4.2.
Operation
4.2.1.
The magnetic mounting brackets may be slid along the length of the light and swivelled to provide the required orientation.
4.2.2.
The first press of the on/off switch selects the high (150lm) output; the second press selects the lower (100lm) output.
4.2.3.
The third press switches the light off.
4.3.
Cleaning
Clean the light with a damp cloth.
DO NOT
use abrasive or solvent cleaners.
