4.1.8.
In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows. Firstly press the vacuum release
valve for 5 seconds to release the vacuum within the pump. Seal off the fluid entry/pouring hole by placing your hand over
it, then pump the handle up and down several times. Any fluid that has entered the pump will be expelled from the air valve
on the underside of the unit.
4.2.
otHer fluidS
4.2.1.
Select and insert the appropriate diameter probe into the fluid to be drained.
4.2.2.
Connect the extension tube to both the pump inlet and the probe.
4.2.3.
The operation of the extractor is the same as described in sections 4.1.5 to 4.1.7.
fig.1
fig.2
t
P69.V3| Issue:1 09/10/17
Original Language Version
© Jack sealey limited
Sealey Group, Kempson Way, Suffolk Business park, Bury St edmunds, Suffolk. ip32 7ar
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
environment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
