NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
S
ole UK Distributor, Sealey Group.
K
empson Way, Suffolk Business Park,
B
ury St. Edmunds, Suffolk.
I
P32 7AR
www.sealey.co.uk
sales@sealey.co.uk
01284 757500
01284 703534
Web
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
7. MAINTENANCE
7.1.
Daily:
Check for damage and fluid leaks.
7.2.
Every 8 working hours:
Check hydraulic oil level. Ensure that the trolley is pumped apart guarantee to its widest possible
position. Remove the oil reservoir filler plug, fig.2.G, and check the oil level. Top up as necessary using approved hydraulic oil only.
Correct oil level should be at the bottom of the threads of the oil reservoir filler plug aperture.
(Sealey part no.HJO500MLS/HJO5LS).
7.3.
Monthly:
Lubricate moving parts and check for abnormal wear and tear.
▲
IMPORTANT
:
NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THIS PRODUCT.
Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT
return the trolley to us.
Please telephone us on 01284 757500 to obtain the address and phone number of your local
agent. If the trolley is under guarantee contact your local Sealey dealer.
8. TROUBLESHOOTING
8.1.
Roller tables will not extend to their full width - low hydraulic level. Check and fill see section 7.1.
8.2.
Pump lever ineffective - hydraulic oil level too high. Check and drain see section 7.1.
W1200T.V2| Issue 3(I) 23/08/16
Original Language Version
© Jack Sealey Limited
