10
Caution:
Discharge flash.
Before opening flash housing door, make sure to discharge the
flash by moving the power switch to the “TEST” position, and then
to the “OFF” position.
Magnetic switch.
The switch has small magnet inside to turn flash power ON/OFF
and TEST. Keep away from compasses and electronics to avoid
magnetic interference. Do not force switch beyond its stop point
to avoid damaging the switch.
Sealing Latch.
Grab the sides of the latch in order to open the battery compart-
ment. Make sure the latch is properly closed before each use. DO
NOT apply external force to latch or hinge area to avoid damage.
Check O-Ring to ensure it is clean and not damaged.