62
VIII.
Care and Maintenance
•
Soak camera in a fresh water tub for about 20 minutes immediately
after underwater use. While holding camera underwater, push
each button a 20 times to rinse out trapped debris and saltwater.
Remove the rubber USB cover to allow fresh water to rinse the
waterproof USB contacts
.
•
Do not directly or indirectly expose the camera to spray-on
sunscreens. Most spray-on sunscreens contain chemicals that
attack the polycarbonate material of the underwater housing,
causing cracks that comprise the waterproof seal.
•
Do not use abrasives, chemicals, cleaning solvents or detergents
to clean the UW camera.
•
Dry the camera and USB contact area with a clean towel the fresh
water rinse. Don’t allow water to dry on the lens or LCD window,
which can cause water stains.
•
Make sure camera and USB contacts are perfectly dry before
charging, PC connection or storage.
•
Do not take apart or attempt to service the camera yourself.
Contact your local authorized SeaLife dealer if the camera
becomes damaged and requires service. Opening and tampering
Summary of Contents for Micro 3.0
