EN-78
Symptom
Cause
Measure
The flash does
not fire.
The flash is set to flash off.
Set the flash to something other
than flash off mode.
The flash is not ready or charged.
It takes approximately 4 seconds
for the camera to recharge the
fash. Wait for LED indicator light
to be solid green.
The flash is set to Auto and there
is enough surrounding light.
Consider setting the flash to ON to
force the flash in bright light.
Even though the
flash fired, the
image is dark.
The distance to the subject is
greater than flash effective range.
Get closer to your subject and
shoot.
The image is too
dark.
The image was captured in a dark
place while set to flash off.
Set the flash to something other
than flash off mode.
It is under-exposed.
Set the exposure compensation to
a larger value.
In Ext. Flash mode, set camera to
far flash to make images brighter.
The image is too
bright.
It is over-exposed.
Set the exposure compensation to
a smaller value.
In Ext. Flash mode, set camera
to macro flash to make images
darker.
The image lacks
natural color.
(Land only)
The image was captured in
conditions that are hard for Auto
White Balance to adjust to.
Manually set select white balance.
The underwater
imageis blue and
lacks color.
Water filters out red and yellow
colors.
Set camera to Sea mode and
select appropriate white balance.
Use optional external Flash
accessory to restore lost colors.
Summary of Contents for SL320
Page 2: ......