42
Optional GSM
Monitoring & Control System
The lanterns may also be fitted with GSM Cell-Phone Monitoring and Control – enabling users to
access real-time diagnostics data and change lantern settings via cell-phone. The system can also be
configured to send out alarm SMS text messages to designated cellular telephone numbers. Users
can also have alarms and reports sent to designated email addresses.
Please contact Sealite for further information and instructions.
Daylight Operation
During daylight hours the microprocessor is in idle mode to reduce power consumption. Time data
continues to be updated once per second. The microprocessor will automatically exit the idle mode as
soon as dark conditions are detected.
Dark Operation
When dark conditions are detected the light:
• Checks for valid time data and is turned on after a delay based on the current time and the length
of the selected flash code;
• If valid time data is not detected the light will turn on after approximately 10 seconds. This light will
not be synchronised.
• If the light turns on unsynchronised it will continually check for valid time data. Once valid data is
found the light will automatically synchronise.
Note
: Lights will not synchronise if different flash codes are selected.
